Concrete Strength Testing Technician (CP-19) RECERTIFICATION ONLY

    December 01, 2018
    7:00 AM - 5:00 PM
     Add to Calendar

    Terracon Consultants
    11555 Clay Road
    Houston, TX 77043

    Concrete Strength Testing Technician (CP-19) 


    • This is for those technicians that are currently Concrete Strength Testing Technician (or recently expired). You must present proof of current or expired certification (an ACI Certification Card or Certificate). NO EXCEPTIONS WILL MADE. NO REFUNDS or TRANFERS will be made due to lack of the Employer or Employee failing to present proof of current or previous certification. 
    • Location: The workshop and exam will be held at the following location: 
      ACI Houston Office (located behind the Terracon office) 
      3900 Claymore Park Drive #120 
    • Houston, Texas 77043  
      Terracon Clay Road 
    • Day 1 (November 30th, 2018) consists of a written / performance review. Check-in for the workshop begins at 1:00 p.m. Students can expect to be finished at approximately 6 p.m. 
    • Day 2 (December 1st, 2018) includes the 60-minute written exam followed by the performance (hands-on) exam. Check-in for the test begins at 6:30 a.m. and the test will begin at 7:00 a.m. The doors will be locked and those that are late will not be allowed to take the exam. 
    • Pricing: Includes the review, CP-19 workbook, hands-on practice, and exam. Books will not be mailed. However, arrangements can be made for pick-up. 
    • Meals: Breakfast is provided during the test, along with drinks. 
    • Physical Strength RequirementYou must be able to lift at least 45 lbs when performing sulfur capping of cylinders. No exceptions without a valid doctor’s note stating that you are not able to lift 45 lbs. 
    • PPE: Steel or composite-toed shoes, long pants, safety glass and gloves are required.  
    • A valid ID is required on the day of the test. The ID will be held until the Examinee completes and turns in their test(s) booklet/answer sheet. 
    • Lodging: If traveling from out of town the following hotels are nearby: 

    Comfort Suites 

    11440 Clay Road  

    Houston, TX 77041 


    Comfort Suites 

    Holiday Inn & Suites 

    4606 Westway Park Boulevard 

    Houston, TX 77041 


    Holiday Inn 

    Sheraton Houston West 

    11191 Clay Road 

    Houston, TX 77041 




    • Interpreters: While we do not provide interpreters, we do have examiners that speak Spanish and Farsi that are able to assist with questions. Please make sure you annotate this on your registration. 
    • Refund Policy: Refunds may be issued on a case-by-case basis, up until 14 days prior to the workshop. There will be a $25.00 service fee charged for refunds. No refunds will be issued within 14 days of the workshop. A one-time transfer will be allowed within the 14 days if notice is given prior to the day before the workshop. There will be a $25.00 service fee for transferring. 
    • Waiver: The attached waiver must be filled out and brought to class. 



    Concrete Strength Testing Technician is an individual who has demonstrated the knowledge and ability to properly perform, record, and report the results of four basic laboratory procedures related to the determination of concrete compressive and flexural strength. 

    Scope and Knowledge: 
    The program requires a working knowledge of the following ASTM practices and test methods:  

    • C617/C617M—Capping Cylindrical Concrete Specimens 
    • C1231/C1231M—Unbonded Caps for Concrete Cylinders 
    • C39/C39M—Compressive Strength of Cylindrical Concrete Specimens 
    • C78/C78M—Flexural Strength of Concrete 

    Job-task analysis (JTA) for ACI Certification of Concrete Strength Testing Technician 

    Certification Requirements: 
    ACI will grant certification only to those applicants who meet both of the following requirements:  

    1. A passing grade on the ACI written examination, and 
    1. Successful completion of the ACI performance examination. 

    The one-hour written examination is closed-book and consists of approximately 40 multiple-choice questions. There are at least eight questions on each of the practices and test methods. To pass the written examination, both of the following conditions must be met: 

    1. At least 60% correct for each of the required practices and test methods, and 
    1. A minimum score of 70% overall. 

    The performance examination is also closed-book and requires actual demonstration of the required practices and test methods. The examinee is judged on his/her ability to correctly perform all of the required steps for each procedure. Recertification is necessary every five years* and requires successful completion of both the written and performance examinations.  
    *NOTE: Certifications initiated prior to January 1, 2008, were granted certification for six years. Due to a policy change, however, individuals initiating the certification process January 1, 2008, and later will be certified for five years.  

    Study Material: 
    Although the workbook is included with the pricing, if you would like to get your workbooks before the workshop, you may arrange to pick it up from the ACI Houston Office. Workbooks will not be mailed. 

    Additional workbooks and study packages are also available from the ACI Bookstore. 


    CP–19, 22nd Edition: Technician Workbook for ACI Certification of Concrete Strength Testing Technician 

    This workbook contains information about the ACI Concrete Strength Testing Technician certification program, study questions, sample checklists, and a practice exam as well as reprints of all of the resource materials referenced by the certification examinations. The CSTT program covers the following ASTM practices and test methods: C617/C617M, C1231/C1231M, C39/C39M, and C78/C78M. 

    eLearning: Concrete Strength Testing Technician Certification Training—4 Courses 

    Program Policy: 
    Concrete Strength Testing Technician Policy 



    Remaining Seats: 1

    $450.00 Concrete Strength Testing Technician (CP-19) RECERTIFICATION

    $250.00 Concrete Strength Testing Technician WRITTEN RETEST