AGGREGATE TESTING TECHNICIAN - LEVEL 2 (CP-45)

    November 09, 2019
    7:00 AM - 2:00 PM
     Add to Calendar

    Terracon Consultants
    11555 Clay Road
    Houston, TX 77043
     Directions

    • Workshop (November 2, 2019) consists of a written / performance review. Check-in for the workshop begins at 6:30 a.m. Students can expect to be finished at approximately 3 p.m.
    • Test (November 9, 2019) includes the 120-minute written exam followed by the performance (hands-on) exam. Check-in for the test begins at 6:30 a.m. and the test will begin at 7:00 a.m. The doors will be locked and those that are late will not be allowed to take the exam.
      • A valid ID is required on the day of the test. The ID will be held until the Examinee completes and turns in their test(s) booklet/answer sheet.
    • Pricing: Includes the review, CP-45 workbook, hands-on practice, and exam. Books will not be mailed. However, arrangements can be made for pick-up.
    • Meals: Breakfast and lunch is provided during the workshop and breakfast is provided during the test.
    • Physical Strength Requirement: You must be able to lift at least 45 lbs when performing some of the performance tests. No exceptions without a valid doctor’s note stating that you are not able to lift 45 lbs.
    • PPE: Steel or composite-toed shoes, long pants, safety glass and gloves are required.
    • Lodging: If traveling from out of town the following hotels are nearby:

     

    Comfort Suites
    11440 Clay Road
    Houston, TX 77041
    832.467.1200
    Holiday Inn & Suites
    4606 Westway Park Boulevard
    Houston, TX 77041
    713.996.8200
    Sheraton Houston West
    11191 Clay Road
    Houston, TX 77041
    281.501.4200

     

    • Points of Contact for this exam are Mark Dornak (mdornak@walkerpartners.com) or Joe Hill (joe.hill@terracon.com).
    • Interpreters: While we do not provide interpreters, we do have examiners that speak Spanish and Farsi that are able to assist with questions. Please make sure you annotate this on your registration.
    • Refund Policy: Refunds may be issued on a case-by-case basis, up until 14 days prior to the workshop. There will be a $25.00 service fee charged for refunds. No refunds will be issued within 14 days of the workshop. A one-time transfer will be allowed within the 14 days if notice is given prior to the day before the workshop. There will be a $25.00 service fee for transferring.
    • Waiver: The attached waiver (see below) must be filled out and brought to class.

     


    COURSE DESCRIPTION:

    An Aggregate Testing Technician – Level 2 is an individual who has demonstrated the knowledge and ability to properly perform, record and report the results of basic field and laboratory procedures for aggregates.

    Scope and Knowledge:

    • T96–02*—Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
      C131/C131M—Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
    • C535—Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
    • T112–00—Clay Lumps and Friable Particles in Aggregate
      C142–97—Clay Lumps and Friable Particles in Aggregate
    • D4791–10—Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
    • T19M/T19—Bulk Density (Unit Weight) and Voids in Aggregate
    • C29/C29M—Bulk Density (Unit Weight) and Voids in Aggregate
    • T104–99*—Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
      C88–13*—Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
    • T113–06—Lightweight Pieces in Aggregate
      C123–04—Lightweight Pieces in Aggregate
    • T176–08—Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test
      D2419—Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test
    • T304–11—Uncompacted Void Content of Fine Aggregate
      C1252—Uncompacted Void Content of Fine Aggregate
    • D5821–01—Determining the Percentage of Fractured Particles in Coarse Aggregate
      *Written exam only


    Certification Requirements:

    ACI will grant certification only to those applicants who meet both of the following requirements:

    • Hold current certification as an ACI Aggregate Testing Technician – Level 1, AND
    • Obtain a passing grade on the ACI Written Examination, AND
    • Successful completion of the ACI performance examination.


    The two-hour written examination is open-book and consists of approximately 100 multiple-choice questions. There are between eight and twelve questions on each of the standards.
    To pass the written examination, BOTH of the following conditions must be met:

    • At least 60% correct for each of the required standards; AND
    • A minimum score of 70% overall.


    The performance examination is also "closed book" and requires actual demonstration of the required standards. The examinee is judged on his/her ability to correctly perform all of the required procdures for each standard.

    Recertification is necessary every five years and requires successful completion of both the written and performance examinations.

    Study Material:
    Although the workbook is included with the pricing, if you would like to get your workbooks before the workshop, you may arrange to pick it up from the ACI Houston Office. Workbooks will not be mailed.

    Additional workbooks and study packages are also available from the ACI Bookstore.


    Program Policy:

    Tickets

    Remaining Seats: 2

    $600.00 Aggregate Testing Technician - Level 2 Full Certification

    $300.00 Aggregate Testing Technician - Level 2 Written Retest

    $300.00 Aggregate Testing Technician - Level 2 Performance Retest

    $550.00 Aggregate Testing Technician - Level 2 Full Certification

    Documents

    Waiver